HOW TO REMOVE ERROR WINDOW IN WINDOWS XP BY RAJ THE HACKER

HOW TO REMOVE ERROR WINDOW IN WINDOWS XP BY RAJ THE HACKER

Sometimes a little dialogue box appears asking if you want to send report to Microsoft for this accident or not? Mostly when we press the button “Don’t send” The software we are using, turns off and we do not get any chance to save our working data. You can solve this problem simply and after this process you will not see this error box again. Just follow these steps. 

 

 

Right click on “My computer” and click on ‘Properties”

On system properties dialogue box click on ‘advance tab”

Click on the error reporting button.

Click on “Disable error reporting”

It’s better for you to Place check mark on “But notify me when critical errors occurs”

Now click Ok.

THANKS

RAJ THE HACKER

8270859989

INCREASE SPEED OF HARD DISK by RAJ THE HACKER

INCREASE SPEED OF HARD DISK by RAJ THE HACKER

Sometimes our computer gets slow down due to low performance of hard disk. This problem appears due to the slow performance or poor speed of hard disk. When we say about poor performance, actually we mean, poor speed of reading/writing of hard drive. This problem can be solved by increasing the hard disk speed. Follow steps below :

 Step-1         Click START menu and select RUN.

Now type (sysedit.exe) in run and press ENTER.

System configuration editor will appear.

Step-2         Here you can see some multiple windows but you will select (system.ini).

This window contains a line (386enh)

Step-3         Now after this line type (irq14=4096)

Now close this window and save it.

Step-4         Reboot your System.

You will feel better performance of your computer.

THANKS

RAJ THE HACKER

8270859989

HOW TO REMOVE PRIYANKA VIRUS SPREADING THROUGH WHATSAPP BY RAJ THE HACKER

HOW TO REMOVE PRIYANKA VIRUS SPREADING THROUGH WHATSAPP BY RAJ THE HACKER

THANKS 

RAJ THE HACKER

8270859989

 

U all know about whatsapp

It lets you connect with your friends/ people & all Be it Android, iOS, Windows Phone, Blackberry OS or Symbian you can connect with your friends using this single app. A virus named “Priyanka” started infecting WhatsApp users all where. This virus started spreading itself using a contact file, users once save/add this  to their contacts may have following:

1.     It will change names of all the group to “Priyanka”.

2. Further on more infection it could replace all your Contact Names with “Priyanka”.

How to Remove Priyanka Virus

Follow the below steps If you are infected by virus:

Note:This  steps involve deletion of contacts and resetting whatsapp DataBase, its better if you have backup of your contacts already

1. Delete All contacts with name “Priyanka”.
2. Go to “Setting” >> Apps >> Manage Apps.
3. Then find “Whatsapp ” in the list . Just Tap on “Force Stop” and then Tap on “Clear data”. 

HOW TO UNINSTALL FOLDER LOCK IF WE FORGET PASSWORD BY RAJ THE HACKER

HOW TO UNINSTALL FOLDER LOCK IF WE FORGET PASSWORD BY RAJ THE HACKER

Folder Lock is a great application used to protect our secret and confidential data in a folder under the password set by user. This tool is of great use to us but the only thing with this software is that it requires the password while uninstalling.

Most of the Time we use Folder Lock & protects our data or items in it.
But when we forget the password of Folder Lock we are in trouble.
Here I am telling how to uninstall FOLDER LOCK in case u forget ur password.


This feature protects unauthorized uninstalling of the software but this becomes a problem when we don’t remember it. This was the same problem with one of readers who has forgotten his password and wanted to uninstall the folder lock.


Method 1:
•    If your Folder Lock is registered then you can just enter the registration key to override the password and uninstall the tool.


Method 2:
•    Download the any full version copy of the same version you are using, 
     for example Folder lock v5.7.5 or v6.0 etc.
•    Install it again and run after installation.
•    You will be prompt to login using a new folder lock user id and folder lock registration key.
•    Use the following info for that :
         FolderLock User ID: NewSoft15805
         FolderLock Registration Key: 221281703



After you have entered the information above, follow the programs procedures until registration is finish. Start folder lock and when the program asks for the password, use the folder Registration Key stated above.
•    Click “options” and select uninstall.


Method 3:
•    Use the folder lock password cracker from the internet and let it do the rest.

THANKS

RAJ THE HACKER

8270859989

HOW TO HIDE THE HARD DRIVES (C:,D:,E:,...ETC) IN UR COMPUTER BY RAJ THE HACKER

HOW TO HIDE THE HARD DRIVES (C:,D:,E:,...ETC) 

IN UR COMPUTER 

BY 

RAJ THE HACKER

Just follow these steps:

(1)   Click Windows key + Run. Type regedit.Enter key.

(2)   Now go to:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

Now in the right pane

create a new DWORD item and name it NoDrives (it is case sensitive).

Now modify it's value and set it to 3FFFFFF (Hexadecimal code) .

Restart the system. Now when you click on My Computer, NO Drives will be displayed (all out).

To enable display of drives in My Computer, simply delete this DWORD item that you created.

(3)   Restart the system.You can now see all the drives again. 

THANKS

RAJ_THE_HACKER

8270859989

HOW TO CREATE CREATE GHOST BOOTABLE TO SD CARD OR USB FLASH DRIVE/ PEN DRIVE BY RAJ THE HACKER

HOW TO CREATE CREATE GHOST BOOTABLE TO SD CARD OR USB FLASH DRIVE/ PEN DRIVE

BY

RAJ THE HACKER

It's a good practice to create an image of your hard drive before using it. Especially when you had to build that computer from scratch and spent hours installing the operating system and all of your favorite applications.

As Symantec Ghost becomes more user friendly, people start to recognize this idea. The idea also works well when you need to clean your PC from viruses. In case anything goes wrong with the operating system, you just need to restore the image using the Symantec bootable CD.

However, the problem comes when we deal with the new version of those small laptops: The netbooks! which usually don't come with a built-in CD-ROM drive to bootup the PC.

The most simple solution would be buying an external CD-ROM drive, which costs you money. And in some cases, you just want to bootup the Symantec Ghost.... with whatever available!

The good news: Almost every recent laptop/netbook comes with a card reader, and even if you wasn't lucky enough, your laptop/netbook should have a USB port!

This guide will tell you how to create a bootable SD card or a USB flash drive with Symantec Norton Ghost.

This task can be done with several different versions of Symantec Ghost; however, the steps from this articles are based on Symantec Ghost 14.

REQUIREMENTS?

Symantec Ghost 14 bootable CD.

A PC with bootable CD/DVD drive.

An SD card (either SD or SDHC), or a USB thumb drive. The size can be as minimum as 

1 GB.

You can also pick a large SD card if you want to store your hard drive image to the card 

as well.

An SD slot or a card reader (for SD card) or a USB slot (for thumb drive)

Follow the above steps in order. Use this guide at your own risks.

First, check to make sure your CD/DVD drive is bootable. (See your BIOS manual or PC 

user guide for details since this is out of the scope of this article).

For SD card: Make sure the SD slot or the card reader is available. if it's a card reader, 

connect it to the PC. Also insert the card.

For USB thumb drive: Make sure the drive is inserted into one of the USB slots.

Bootup the computer using the Symantec Ghost CD (Details vary on different 

computers). On Windows XP, during the startup, you should see the prompt "Press any 

key to boot from CD...".

Once the Symantec Recovery startup is complete, you should see the main screen of 

Symantec Ghost 14 Recovery similar to this image:

·  Select "Analyze" from the left menu.

Then click on "Open Command Shell Window". A command prompt window will display.

·  At this command prompt window, type: "diskpart" (one word, without quotes) and hit enter. The prompt now changed to "DISKPART>"

·  Now type "list disk" and hit enter. You should now see a list of all available disks. Base on the size of each disk listed, find the one that matching your SD card (or thumb drive) and note its disk number under "Disk ###". If you don't see your SD card (or flash drive) listed, verify if it is inserted or plugged in (you might need to restart the computer and try again).

·  Type "select disk <n>" (replace <n> with the disk # noted from the previous step) then hit enter.
Important!! Besure to select the correct disk (your SD card or thumb drive) as you will be erasing the drive.
Sample image with a 4-GB SD selected:

·  Create a primary partition for the the disk by executing the following sequence of commands:
clean
create partition primary
select partition 1

·  Set the primary partition active, type: "active" and hit enter

·  Perform a quick format with the following command:
format fs=fat32 quick

·  Then type:
assign
exit

·  Your SD card (or the flash drive) is now bootable and will act similar to a local hard drive. In order to boot this card with Symantect Ghost Recovery, copy all contents from the Symantec Ghost disc to the SD card (or the flash drive). Besure to copy everything including any hidden files/folders.

The SD card or flash drive is now bootable and will boot your laptop/netbook to Symantec Ghost Recovery utilities exactly the same way as of the CD (To boot with the card on your laptop/netbook, don't forget to set your bios to search for the SD card or USB external devices in the boot sequence).

THANKS

RAJ_THE_HACKER

8270859989

HOW TO PRINT YOUR SINGLE PHOTO INTO MULTIPLE PAGES BY RAJ THE HACKER

HOW TO PRINT YOUR SINGLE PHOTO INTO MULTIPLE PAGES BY RAJ THE HACKER

Printing one image into many pages is possible, it is not that easy as it is with this utility called Print It. Print It is an image printing utility that can print your images into multiple pages in very simple steps. Moreover you get to see the grid lines which will show how your image will be divided into parts on the pages

How to Use:

• Just load your image in the tool by selecting 

the Load button.

• Select your Print mode (Image Size prints the image in 

multiple pages, Fit to page option will fit the image into 

single sheet, Stretch to page option will fill the page with 

one  image, Pixel to pixel option prints the image in printer 

resolution).

• You can select to either disable or enable the grid lines 

(which would not be printed either ways).

• In case you don’t have a printer as of now, select the Save 

Parts button to save the split images as soft copy and print 

them later.

This tool is free to use and is supported on all Windows versions.

DOWNLOAD HERE

  

THANKS

RAJ THE HACKER

8270859989

HOW TO BLOCK IMAGES IN FIREFOX BEING DISPLAYED BY RAJ THE HACKER

HOW TO BLOCK IMAGES IN FIREFOX BEING DISPLAYED BY RAJ THE HACKER

You can do so by managing the “hosts” files of your computer but we found the following method easier than that. If you want to block images from a specific host in Firefox, follow these steps:

• Right-click on any of the images of the webpage and select View Image Info from the context menu.

• Now you will see a Page Info window listing all media on the page.

• You will see that the info of that image which you have selected will be highlighted. You can block that image using Block images from option on the page.

 

Browse through the media listings and check if the images do not get loaded from another hosting site. Once it is done, close the window and reload the page. The page will load properly without displaying images. If you want to access a site’s content without having the images to load, you can use this feature method

THANKS

RAJ THE HACKER

8270859989

HOW TO SOLVE “NO PREVIEW AVAILABLE“/ “FILE FORMAT NOT SUPPORTED” ERROR WHILE OPENING A JPEG/JPG IMAGE BY RAJ THE HACKER

HOW TO SOLVE “NO PREVIEW AVAILABLE“/ “FILE FORMAT NOT SUPPORTED” ERROR WHILE OPENING A JPEG/JPG IMAGE BY RAJ THE HACKER

 It can happen sometimes that you have some image that you downloaded from internet and which on opening with Windows Picture and Fax Viewer displays an error message “No Preview Available” or “File format is not supported”. The problem happened to one of our readers and here is the solution for it.
Solution:
•    According to the MS article, the problem occurs if the graphic file is compressed.
•    However to solve this just make sure that you have turned this option off in the web browser.
•    Open the Internet Explorer and go to Internet Properties.
•    Click the Web Graphics tab, click Never compress graphics, and then click Apply.
•    Click the General tab.
•    Under Temporary Internet files, click Delete Files.
•    Click OK if you are prompted to confirm the deletion.
•    Click OK.

THANKS

RAJ THE HACKER

8270859989